Wind Turbine/en

Status

The wind turbine is in the research phase of product development, we are focusing on the TiVA-System right now.

Introduction

We are developing an open source wind turbine with an agile open collaboration.

TiVA and wind turbine specifications started with a joint development venture between etemu.com and Apollo-NG. All information is released open source and for free, for a better world and for the fun of open collaboration. (CC BY-SA)

TiVA

Research and development is currently concentrated onto TiVA, a tiny wind turbine prototyping platform. With this very small turbine, we can easily change parts, try out new ideas and increase the quality of the design on a small scale in a fast and inexpensive way. Please have a look at the TiVA page for further information.

Team

If you want to participate add your name and how you want to participate here, also please introduce yourself in the Google Group.

• Alex Shure – research and development
• chrono -
• Nikolay Georgiev - communication and organization

Roadmap / Log

• 20120211 Alex Shure Start of "Open Agile SCRUM GVCS machine development" mailing list, Nikolay Georgiev sent an E-Mail to some OSE:E members - We begin to discuss the OSE:E project of constructing a wind turbine
• 20120222 Alex Shure First online meeting on the OSE:E project "develop a wind turbine" in mumble
• 20120311 Alex Shure I had a 6 hour meeting with a German wind turbine technician who works in QS where we discussed various aspects, advantages and disadvantages of horizontal and vertical axis wind turbines.
• 20120324 Alex Shure Had an online conference in mumble and spoke with Chrono, founder of the Apollo-NG[1] project. Chrono has experience in electronics, especially in integrated low power switching power supplies and mobile energy supplies. He is transforming a van into a mobile hackerspace, powered by renewable energy, totally off the grid.
• 20120325 Alex Shure Phone conference with Detlef Schmitz from the solar car team Heliodet; Detlef offered to build one small wind turbine prototype. He has contacts also with engineers and technicians form the solar car project, especially students from the FH/uni in Bochum.
• 20120326 Alex Shure Added the EVA wind turbine design. We could develop a VAWT which can be optionally equipped with the EVAwt features. The biggest disadvantage is the design issue with the top cover plate: with the EVAwt design, I can't think of an easy way to span the cables from the top for now.
• 20120327 Alex Shure chrono added a pad on Apollo for collaboration
• 20120328 Alex Shure Calculations
• 20120329 Alex Shure contacted Bernd from http://www.daswindrad.de
• 20120330 Alex Shure Added the TiVA page to the wiki and further designed the concept in the etherpad..
• 20120331 Alex Shure chrono moved the content from the pad at Apollo-NG into the dokuwiki at Apollo-NG. I split the TiVA parts and copied them to a wiki page here at OSE
• 20120404 Alex Shure Researched about copper losses in the enameled copper wire windings, let's use 0.45 - 1 mm wire.
• 20120405 Alex Shure I updated the TiVA wiki entry at OSE with a full BOM for a very first prototype, including sheet material for the negative form, painting and so on. Also got Mario on board, who has experience in 3D modeling.
• 20120406 Alex Shure Meeting with Mario, 3D-modelling session in Autodesk Inventor.
• 20120407 Alex Shure Met M. Klein, CEO of Wezek GmbH (engineering, automation) and spoke about waterproof cases for the electronics.
• 20120408 Alex Shure Specification for TiVA's alternator outlined. Diameter reduced to less than 200 mm, 1 phase alternator design is preferred due to less costs and the low power demand.
• 20120409 Alex Shure Finished the calculations of TiVA's alternator. 16 round magnets, 16 coil segments, switchable from 8s1p up to 1s8p, calculated efficiency after rectification is above 90% for low loads.
• 20120410 Alex Shure We should stick to symmetric wing profiles at the Darrieus style rotor, because those would be the easiest to fabricate. Researching on some NACA profiles now. Wings of the V-Rotor should incorporate a metal strip sandwiched between the two halves of the wing for the easiest and most rigid wing fixation method.

General design outlines

The wind turbine should be loosely designed according to the OSE Core Values except points 8 and 9, which demand high performance and equal to or higher than industrial efficiency

In addition to the OSE Core Values, the wind turbine should be safe to operate, e.g. have a suitable safety factor in all structural calculations, proper isolation to prevent an electric shock.

Assembly height

The complete assembly of rotor and mast should not be higher than 10 m. If regional communities permit higher masts, the maximum height must not exceed 20 m, to avoid national and ICAO air traffic security issues and legal obligations to carry warning lights and report about their functionality.

Size

We won't start with a turbine greater than 4 m² due to restrictions in Europe pointed out by Detlef Schmitz. A wind surface of 4 m² equals a 2 m diameter rotor with a height of 2 m. Hint: In every wind condition, a 1 m diameter VAWT with a height of 4 m (4m²) is more efficient than a 2 m x 2 m (4 m²) VAWT due to the higher rpm and better aerodynamic figures. Industrial VAWTs aim for a large height, not for a large diameter.

---

We want to design a rather small VAWT, resulting in the following advantages:

• + DIY! People should be able to build them! -> KISS principle
• + less moving parts
• + does not necessarily have to be elevated, can stand on the ground
• + collects wind from every direction: no need for a directional control (+less mechanics, electronics)
• + has a smaller footprint
• + easier to design
• + way more easy to build
• + does not need a variable pitch control for high wind speed/ high power designs
• + uses cheaper materials, less bearings and axles, less machining operations
• + maintenance is easier, as the generator is on the ground, no need for a lift or a breakdown of the turbine head
• + a modular design is possible in a certain range (e.g. building it higher/longer in any direction)
• + does not necessarily need moldings or 3D shapes like sophisticated VAWT turbine blades

• - lower rpm at the same rotor diameter, at the same wind surface area due to the partly reversed draft of the wings but:
• + can have a small diameter but a rather large height, thus more torque and more rpm

Main disadvantage against a horizontal axis wind turbine:

• - less power output compared to a sophisticated HAWT design if wind direction does not change often and turbulence is low

The small form factor alone yields the following advantages next to being diy-friendly:

• + easier maintenance
• + mobility, less weight
• + smaller impact on the environment/nature
• + lower system voltage and lower currents, less risky to operate
• + a smaller power rating results in a less complicated generator and inverter design
• + batteries can be charged quick&dirty with a simple charging circuit from a small wind turbine, which would not be possible with a high power wind turbine

Specialties about distributed energy sourcing with small wind turbines:

• (tbd) Multiple smaller wind turbines may have more physical weight per sourced energy (kg/kW) versus one large one.
• - requires an additional electrical infrastructure between multiple smaller wind turbines versus one large one -> more cables and balancing (electronics)
• + the grid can be laid out in such a way, that the turbines can be placed where the energy is needed the most, resulting in smaller run lengths of power cables and less power losses.
• + the small turbines can easily be moved to an area with a higher wind speed. This is interesting when it comes to structural or seasonal changes of the wind, e.g. when the trees grow leaves and form a barrier which decreases the ground wind speed or they form an alley/a tunnel which increases the wind speed, one may move the wind turbine to gain from the new environment.

Simply said, it is more flexible to use many small turbines versus one large one. If a larger energy source is required, we connect multiple wind turbines in a local grid -> distributed energy sourcing, a 'wind farm' consisting of VAWTs:

The Caltech Field Laboratory for Optimized Wind Energy where arrays of closely spaced vertical axis wind turbines were tested.

Dabiri carried out field tests in the summer of 2010 at an experimental farm known as the Field Laboratory for Optimized Wind Energy (FLOWE), which houses 24 10-meter-tall, 1.2-meter-wide VAWTs. In the field tests, which used six VAWTs, Dabiri and his colleagues measured the rotational speed and power generated by each of the turbines when placed in a number of different configurations. One turbine was kept in a fixed position for every configuration, while the others were on portable footings that allowed them to be shifted around.

They found that the aerodynamic interference between neighboring turbines was completely eliminated when all the turbines in an array were spaced four turbine diameters (roughly five meters or 16 feet) apart. In comparison, propeller-style HAWTs would need to be spaced 20 rotor diameters apart - which equates to a distance of more than one mile for the largest wind turbines currently in use - for the aerodynamic interference to be eliminated.

The six VAWTs generated from 21 to 47 watts of power per square meter of land area, while a comparably sized HAWT farm generates just two to three watts per square meter.

How does the wind turbine generate energy?

The energy is in the wind due to it's speed/local pressure differences. A wind turbine converts kinetic energy from the wind into mechanical energy. The VAWT yields energy as kinetic energy from the wind is absorbed by rotating wings.

A sketched 3D ISO view of a simplified VAWT wind energy diagram. Full size view recommended. Note: Pictured is a drag-only rotor, but our intention is to design a lift-rotor, as it has a higher tip speed ratio and revolves faster.

EVA wind turbine

Example of an EVA wind turbine design, ISO view of the top end. Note the wing at the front and the tail rudder.

The Enhanced Vertical Axis Wind Turbine idea incorporates an intake manifold at the front which is always facing the direction where the strongest wind is coming from. The main disadvantage of the VAWT against a HAWT is reduced: There is no attacking wind which will work against the natural, clockwise rotation of the VAWT. This may result in an increased overall efficiency.

• + No wind is working 'against' the turbine, contrary to a standard VAWT, where half of the turbine is exposed to wind which flows into the 'wrong' direction
• + The wind speed right at the turbine intake is increased
• + (tbd) less oscillating forces, the wind flow is about unidirectional at the turbine: less vibrations and less wear at the rotating parts, more static and less dynamic thrust at the bearings, less torque ripple and cyclical stress.
• - More material is used for the construction of an EVA wt: two bearings, arms and static wings. However, these additional parts are not difficult to manufacture, as the surfaces are all plane.

Who can help with FEA + fluid dynamics and simulate the wind flow at various EVA wind turbine designs? We want to investigate what wing form the intake should have and at which angle it should be mounted. Also: Does it increase the efficiency if there's another, longer planar surface at the right of the intake parallel to the wind direction (The position where only a short, structural surface is shown in the sketches)

• 

  Normal airflow in a VAWT at the maximum torque moment. Note the non-uniform airflow with varying surfaces as the turbine blades advance.

• 

  Airflow in the EVA wt design. View from the top.

• 

  Example of a simple constructional integration of the EVA wt design with sheet material. ISO-View from the top.

Calculations and Simulations

All calculations are made in the metric system. Corrections and additional approaches are always welcome.

Let's start with the base mount. As the design outlines state we won't start with a turbine greater than 4 m² due to restrictions in Europe pointed out by Detlef Schmitz. A wind surface of 4 m² equals a 2 m diameter rotor with a height of 2 m.

<m>F_{pole} = \frac{1}{2} \times \rho \times C_d \times A_{wind} \times v_{wind}^2</m>

<m>\rho</m> = Density of air = about 1.2 Kg/m³
<m>C_d</m> = Coefficient of drag = 1.0 (cylinder Re > 100)
<m>A_{wind}</m> = Area of turbine = max 4 m²
<m>v_{wind}</m> = Wind speed in m/s

<m>F ({50\frac{m}{s}) = \frac{1}{2} \times 1.2\frac{kg}{m^3} \times 1.0 \times 4m^2 \times 50\frac{m}{s}^2 = 6000 N</m>

<m>F ({30\frac{m}{s}) = 2160 N</m>

<m>F ({20\frac{m}{s}) = 960 N</m>

<m>F ({10\frac{m}{s}) = 240 N</m>

<m>F ({5\frac{m}{s}) = 60 N</m>

TODO: Leverage should be taken into account here. How to calculate the load at the bearing points?

TODO: Consider serious safety factor for robustness and against oscillations.

Maximum wind speed the turbine has to withstand:

IEC wind class	I	II	III	IV
50-year-maximum	50 m/s	42,5 m/s	37,5 m/s	30 m/s
average wind speed	10 m/s	8,5 m/s	7,5 m/s	6 m/s

Example for a classification in Germany, Berlin: The mean wind speed is classified above IEC class IV with an average value of 2.3 - 3.6 m/s at ground level without any obstacles.

IEC classes are realistic for higher wind zones, industrial wind turbines are usually mounted at >50 m. We are safe with an IEC class IV design. The design should be build for a maximum load of <m>F ({30\frac{m}{s}) = 2160 N</m>.

Estimating the power output of the VAWT

Power available in the wind:

<m>P_{wind} = \frac{1}{2} \times \rho \times A_{wind} \times v_{wind}^3</m>

<m>P_{wind}</m> is the power, which is available in the wind. It is available as kinetic energy due to the moving mass of the air.
<m>\rho</m> = Density of air = about 1.2 Kg/m³
<m>A_{wind}</m> = Area of turbine = max 4 m² at a small scale turbine
<m>v_{wind}</m> = Wind speed in m/s

Power available from the turbine:

This is the estimated mechanical wind power conversion.

<m>P_{mech}=P_{wind} \times \rho_{turbine} </m>

while
<m> \rho_{simple} = 20% \\ \rho_{decent} = 30% \\ \rho_{good} = 35% \\ \rho_{superbVAWT} = 40% \\ \rho_{superbHAWT} = 50% \\ \rho_{limit} = 59% \\ </m>

A tuned VAWT may have a best-case efficiency of 40%, while a simple drag-based turbine with no optimization nor special aerodynamics may have an efficiency of about 20%.

Other links

• non OS example 1
• http://www.fundamentalform.com/html/involute_wind_turbine.html
• http://www.daswindrad.de/forum/viewtopic.php?f=2&t=21
• http://www.tinytechindia.com/windenergy.htm
• http://www.macarthurmusic.com/johnkwilson/MakingasimpleSavoniuswindturbine.htm A bit more efficient than a standard Savonius
• https://www.youtube.com/playlist?list=PL212B7C0D6057AC28 youtube playlist

Daniel

• http://www.youtube.com/user/danielturbin/videos?sort=dd&view=0 Wind is only one of many nice things he did
• http://www.maskinisten.net/viewtopic.php?t=8655 Forum with pictures and tests explained in Swedish